Scholarly Research Excellence

Digital Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 29024


Select areas to restrict search in scientific publication database:
10008439
Study on the Application of Lime to Improve the Rheological Properties of Polymer Modified Bitumen
Abstract:
Bitumen is one of the most applicable materials in pavement engineering. It is a binding material with unique viscoelastic properties, especially when it mixes with polymer. In this study, to figure out the viscoelastic behaviour of the polymer modified with bitumen (PMB), a series of dynamic shearing rheological (DSR) tests were conducted. Four percentages of lime (i.e. 1%, 2%, 4% and 5%) were mixed with PMB and tested under four different temperatures including 64ºC, 70ºC, 76ºC and 82ºC. The results indicated that complex shearing modulus (G*) increased by increasing the frequency due to raised resistance against deformation. The phase angle (δ) showed a decreasing trend by incrementing the frequency. The addition of lime percentages increased the complex modulus value and declined phase angle parameter. Increasing the temperature decreased the complex modulus and increased the phase angle until 70ºC. The decreasing trend of rutting factor with increasing temperature revealed that rutting factor improved by the addition of the lime to the PMB.
Digital Object Identifier (DOI):

References:

[1] Soudani, K., V. Cerezo, and S. Haddadi, 2016. Rheological characterization of bitumen modified with waste nitrile rubber (NBR). Construction and Building Materials. 104: p. 126-133.
[2] Cardone, F., Frigio, F., Ferrotti, G., Canestrari, F. 2015. Influence of mineral fillers on the rheological response of polymer-modified bitumens and mastics. Journal of Traffic and Transportation Engineering, 2(6): p. 373-381.
[3] Wang, C., Wang, P., Li, Y. Zhao, Y., 2015. Laboratory investigation of dynamic rheological properties of tourmaline modified bitumen. Construction and Building Materials. 80: p. 195-199.
[4] Sobolev, K., Flores V., Ismael S., Rajan W., Nazimuddin M., Saltibus, N. E. 2014., The effect of fly ash on the rheological properties of bituminous materials. Fuel. 116: p. 471-477.
[5] Bulatović, V. O., Rek, V., & Marković, K. J. 2012. Polymer modified bitumen. Materials research innovations, 16(1), 1-6.
[6] Wu, S., Pang, L., Mo, L., Qiu, J., Zhu, G., & Xiao, Y. 2008. UV and thermal aging of pure bitumen-comparison between laboratory simulation and natural exposure aging. Road Materials and Pavement Design, 9(sup1), 103-113.
[7] Eberhardsteiner, L., Füssl, J., Hofko, B., Handle, F., Hospodka, M., Blab, R., & Grothe, H. 2015. Towards a microstructural model of bitumen ageing behaviour. International Journal of Pavement Engineering, 16(10), 939-949.
[8] Hintz, C., & Bahia, H. 2013. Understanding mechanisms leading to asphalt binder fatigue in the dynamic shear rheometer. Road Materials and Pavement Design, 14(sup2), 231-251.
[9] Moreno-Navarro, F., Rubio-Gámez, M. C., & Jiménez Del Barco-Carrión, A. 2016. Tire crumb rubber effect on hot bituminous mixtures fatigue-cracking behaviour. Journal of Civil Engineering and Management, 22(1), 65-72.
[10] Shen, J., & Amirkhanian, S. 2005. The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM binders.The International Journal of Pavement Engineering, 6(4), 265-271.
[11] Radziszewski, P., Kowalski, K. J., Krol, J. B., Sarnowski, M., & Piłat, J. 2014. Quality assessment of bituminous binders based on the viscoelastic properties: polish experience. Journal of Civil Engineering and Management,20(1), 111-120.
[12] Veytskin, Y., Bobko, C., & Castorena, C. 2016. Nanoindentation investigation of asphalt binder and mastic viscoelasticity. International Journal of Pavement Engineering, 17(4), 363-376.
[13] Toraldo, E., Mariani, E., & Malvicini, S. 2015. Laboratory investigation into the effects of fibers on bituminous mixtures. Journal of Civil Engineering and Management, 21(1), 45-53.
[14] Chegenizadeh, A., Keramatikerman, M., Nikraz, H. 2016. Flexible Pavement Modelling using Kenlayer. Electronic Journal of Geotechnical Engineering 21, Bund. 07, 2467-2479.
[15] AASHTO T315-10. Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer. American Association of State Highway and Transportation Officials; 2010. p. 32.
Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007